What is gilsonite sealcoating?

gilsonite sealcoating

After reviewing a few issues related to gilsonite, it’s time to offer a discussion on gilsonite sealcoating.  But, what is gilsonite sealcoating?  And what tool is used in sealing gilsonite?  Stay with us.

Gilsonite sealcoating:

High-performance solvent-based and emulsion pavement sealers dry faster, look better, and last longer because to Gilsonite’s proven qualities. It acts as a natural antioxidant, allowing pavement sealers to last longer. Gilsonite’s unique molecular fractions revitalize the sealed pavement. Gilsonite’s strong bonding characteristics aid in weatherproofing the sealer.

Longer-lasting pavement is better for the environment. There is a proven considerable reduction in energy utilized and required resources when pavements are rejuvenated with recycled asphalt rather than replaced.

Gilsonite revitalizes and re-saturates blacktop surfaces, resulting in a beautiful jet black finish. This driveway coating guards against the deadliest enemies of your pavement: moisture and frost. Gilsonite Asphalt Seal is the simplest of the pavement sealers to use, and it produces a deep, black surface with a slight sheen. It will not be affected by freezing temperatures, nor will it wash away if caught in a rain shower before totally dry, unlike water-based sealers.

Recommended for driveways, parking lots, walks, and other outdoor asphalt pavement surfaces in residential areas.

Cleaning and drying the surface is required. Sweep the area thoroughly with a hard broom. A crack sealer should be used to fill cracks greater than a hairline. Before applying pavement sealer, the crack sealer must cure.

Sealcoating can be sprayed on or rolled onto the surface using a medium to heavy roller. Apply as thinly as possible, taking care not to create puddles in low-lying places. Depending on the porosity of the pavement, an approximate coverage rate of 80-100 square feet per gallon is possible. Avoid using a thin product.

Depending on the temperature and humidity, the coating should dry in 24 hours or less. When the temperature is over 50°F, apply. Drying time is affected by the weather and thickness. Allow no traffic until the coating has completely dried.

Gilsonite sealer penetrates into the asphalt matrix, filling micro-voids and toughening all asphalt surfaces when used as a Preservation Treatment. Gilsonite Resin’s high molecular density forms an impervious shell that becomes integrated into the surface of the pavement, allowing all types of pavement to better survive heavy traffic, ploughs, and the ageing process. Pavements are kept malleable, supple, and sturdy with Gilsonite sealer. The use of Gilsonite sealer reduces the amount of maintenance needed, and the cost savings are clear. Longer road pavement life also means less building time and less reliance on finite petroleum resources for materials (fuels and asphalt).

Asphalt preservation with Gilsonite sealer is a proactive method that uses timely, cost-effective preservation processes to extend the life of our roads. Climate, weather, storms, traffic, and ordinary wear and tear have been wreaking havoc on our roadways from the beginning. According to data from the US Federal Highway Administration, the average pavement service life before rebuilding is now only 8.5 years. In just five years, up to 80% of pavement elasticity is lost. There is severe irreparable damage at this point in the aging process.

Despite water-based sealers, this gilsonite sealcoating machine will not be damaged by cold temperatures, nor will it wash away if caught in a rainstorm before it has completely dried. This is an asphalt-based penetrating sealer that rehydrates and rejuvenates asphalt surfaces, leaving a lustrous jet black finish.

Seal Coating Types:

gilsonite seal coating

  • Coal tar sealers and asphalt emulsion coatings are the two most used seal coating products.
  • The first is less expensive, but it will require more product management when implemented.
  • Professional crews are more likely to use it.

Seal coating has been scientifically demonstrated to considerably maintain and hence increase the life of hot mix asphalt pavements, according to research undertaken by both The Asphalt Institute and The National Center For Asphalt Technology.

This driveway coating guards against the deadliest enemies of your pavement: moisture and frost. It also resists stains from fuel, oil, and chemicals. Because asphalt-based sealcoating products do not emit as many volatile organic compounds (VOCs) as coal tar-based sealcoating products, they are better for air quality. They also smell nicer and are less irritating to the skin. The first step in sealing your driveway is determining whether to use water-based or oil-based sealers.

Although both types have advantages, water-based sealers have a faster cure time and are more environmentally friendly.

Using gilsonite sealer has the following advantages:

  • Made from a percentage of crude oil that has been selectively refined (from the process of refining petroleum) (coal-tar burns skin on contact)
  • Gilsonite sealer provides longetivity (two to four years) when excellent ingredients and proper application are used.

In some areas, coal tar asphalt driveway sealant is considered the industry standard. Coal tar sealer, manufactured from sticky coal tar, has long been the preferred solution for both asphalt driveways and streets. On a driveway, it can last up to five years.

“AsiaGilsonite” Service Company is pleased with its brilliant track record in supporting Gilsonite customers and enthusiasts in buying and selling Gilsonite and hopes to play a key role in facilitating this through innovative services.

5/5 - (1 vote)

Share this article :


Leave a Comment

Your email address will not be published. Required fields are marked *